Địa chỉ: 12 Nguyễn Hữu Thọ, Xã Phước Kiển, Huyện Nhà Bè, TP. Hồ Chí Minh
Hotline hỗ trợ 0981 685 188

  1. Trang chủ
  2. Sản phẩm
  3. ITALCOPPIE
  4. Cảm biến cải tiến
  5. TEMPERATURE AND HUMIDITY SENSOR WITH RS-485 SERIAL OUTPUT (MODBUS RTU)

Danh mục sản phẩm

TEMPERATURE AND HUMIDITY SENSOR WITH RS-485 SERIAL OUTPUT (MODBUS RTU)
TEMPERATURE AND HUMIDITY SENSOR WITH RS-485 SERIAL OUTPUT (MODBUS RTU)

TEMPERATURE AND HUMIDITY SENSOR WITH RS-485 SERIAL OUTPUT (MODBUS RTU)

  • Mã sản phẩm:

    EVOSERUI

    • Programmable Parameter

    By a single cable, it is possible create a sensors network and interfacing them directly to a PLC or a PC equipped with a supervisory software (SCADA). The connection between the devices is realized with M12 connectors for rapid installation without errors and with degree of protection IP67. The stem realized with flexible compact mineral insulated cable (Ø6mm) it is available in different lengths and is ideal for critical mechanically applications ; in additions are available various types of process connection welded to the stem and also
    sinterized filters.

    TECHNICAL DATA

     

     
    Supply voltage
    12 ÷30 Vdc (polarity protected)
    Accuracy
     
    refer to the graph
     
    Power consumption
     
    0,25 W (without display)
     
    0,5 W (with display)
     
    Communication protocol
     
    modbus RTU (max. baud rate 38.400)
     
    Serial interface
     
    RS-485 (not insulated)
     
    Input/Output insulation
     
    None
     
    Indicator LED
     
    1 green led for the power supply
     
    1 red led for the serial communication Tx
     
    1 red led for the serial communication Rx
     
    Range configurations
     
    modifiable using the special EVOSER SET configuration kit (a PC with Windows operating system is required)
     
    PCB operating temperature
    -40 ÷65 °C
    EMC
     
    According EN 61326
     
    Sensing element operating temperature range
    -40 ÷120°C
    Type of sensor
     
    digital
     
    Sensor construction type
     
    with mineral compact insulation (M.I.C.)
     
    Sensing element
     
    SENSIRION STH75 model digital sensor
     
    Sensor protection
     
    removable filter
     
    Response time (*)
    (*) test in water in accordance with IEC 751. Time taken to reach 63.2% of temperature step
    less than 30 seconds (without filter)
     
    M.I.C. min. bending radius
     

    Giá:

    Liên hệ

  • Lượt xem:

    3600
Sản phẩm tương tự
4 -20MA LOOP POWERED DISPLAY

4 -20MA LOOP POWERED DISPLAY
COMPACT TEMPERATURE PROBE WITH 4 ÷ 20MA OUTPUT

COMPACT TEMPERATURE PROBE WITH 4 ÷ 20MA OUTPUT
COMPACT TEMPERATURE PROBE WITH 4÷20MA OUTPUT AND METALLIC BODY

COMPACT TEMPERATURE PROBE WITH 4÷20MA OUTPUT AND METALLIC BODY
EVOMINI SET CONFIGURATION KIT FOR EVOMINI+/ SCAT / CRYO/ X PRODUCTS

EVOMINI SET CONFIGURATION KIT FOR EVOMINI+/ SCAT / CRYO/ X PRODUCTS
EVOMINI T

EVOMINI T

EVOMINI+C PROGRAMMABLE TRANSMITTER

EVOMINI+C PROGRAMMABLE TRANSMITTER
EVOMINIX C

EVOMINIX C
EVOMINIX CM PROGRAMMABLE TEMPERATURE TRANSMITTER WITH METALLIC BODY

EVOMINIX CM PROGRAMMABLE TEMPERATURE TRANSMITTER WITH METALLIC BODY
EVOMINIX D COMPACT PROGRAMMABLE TEMPERATURE TRANSMITTER WITH METALLIC BODY AND CONNECTION FOR FOOD T

EVOMINIX D COMPACT PROGRAMMABLE TEMPERATURE TRANSMITTER WITH METALLIC BODY AND CONNECTION FOR FOOD T
EVOMINIX F COMPACT PROGRAMMABLE TEMPERATURE TRANSMITTER WITH METALLIC BODY AND Ø6MM STEM TAPERED TO

EVOMINIX F COMPACT PROGRAMMABLE TEMPERATURE TRANSMITTER WITH METALLIC BODY AND Ø6MM STEM TAPERED TO

hotline